Coeur d'Alene, ID
Headquarters for North Idaho and Spokane208-500-1043Mon-Fri 8am-6pm, Sat 8am-4pm PT
Serving Coeur d'Alene, Post Falls, Hayden, Rathdrum, Sandpoint, Harrison, St. Maries, Spokane, Spokane Valley, Liberty Lake.
Garages, basements, patios, driveways and walkways, coated in one day by our own crews with premium, industrial-grade polyurea and polyaspartic resins. Tougher than epoxy, UV-stable, slip-resistant and built for harsh freeze-thaw winters, with a lifetime warranty to prove it. Need cracks repaired first, or cabinets to finish the garage? We do both.
Diamond grinders open the slab and cracks get filled with polyurea. Then the polyurea base coat goes down, flake or silica is hand-broadcast to full refusal, and everything is locked under a UV-stable polyaspartic topcoat.

The Rhino floor system
Rhino Coatings is a veteran-owned floor coating company with two Idaho locations. Our Coeur d'Alene headquarters covers North Idaho and the Spokane area, and our Boise location covers the Treasure Valley. Both install the same system with our own crews: diamond-ground prep, a polyurea base coat and a UV-stable polyaspartic top coat, backed by the same lifetime warranty.
Mon-Fri 8am-6pm, Sat 8am-4pm PT
Serving Coeur d'Alene, Post Falls, Hayden, Rathdrum, Sandpoint, Harrison, St. Maries, Spokane, Spokane Valley, Liberty Lake.
Mon-Sat 7am-7pm MT
Serving Boise, Meridian, Nampa, Eagle, Caldwell, Kuna, Star, Wilder, Homedale.
Polyaspartic floor coatings for garages, patios, basements, shops and commercial floors, plus made-in-USA garage cabinets to finish the space. One local crew, a one-day install on most floors, and a lifetime warranty.

Residential garage floors. Chip or silica system over diamond-ground prep. 1-day install, walk on it in about 8 hours, drive on it in about 72.
Garage floor coatings
UV-stable polyaspartic for patios and exterior slabs. Resists Idaho freeze-thaw, road salt and deicer. Will not yellow.
Patio & pool deck coatings
Basements, kitchens, mudrooms, showrooms. Silica sand systems give you a smooth, paint-matched finished floor.
Basement floor coatings
Mechanic shops, pole barns, woodshops and equipment storage. Built for hot tires, fluids and impact.
Shop floor coatings
Made-in-USA melamine garage cabinets in 10, 12 and 14 ft runs. Adjustable shelving, 18 colors, and slatwall on the Tradesman series.
Garage cabinets
Showrooms, retail, restaurants, manufacturing floors. Built for hot tires, fluids and impact, with phased installs that keep downtime short.
Commercial floor coatings53 reviews republished from Google and Housecall Pro.
Real reviews from our customers, in their own words, each linked to the platform it was left on. Each location's Google reviews and current rating: Coeur d'Alene and Boise.
“Rhino coatings delivered on exactly what I was looking for. They helped tailor a solution to my needs and did it without any hiccups. I’d recommend them to family and friends any day.”
“Very happy with our new Rhinocoating garage floor, Karl and crew were very professional, on time and kept us informed all along the way. Highly recommended!!, Veteran owned!!”
“The guys did a fantastic job! Beautiful work! Highly recommended. This really buttoned up our shop-house. Like a cherry on top :-)”
“This is a great company. The crew was professional, efficient and worked their tails off. I had no issues with the owner down to the line grunt. They were fantastic and I would recommend them to my friends and family without hesitation.”
“Karl is customer focused and will attempt to complete the job as to the customer needs. Karl is honest and friendly.”
“Karl and his team did a beautiful job on my garage floor. They fixed a crack, sanded the floor. It looks amazing now. They also fixed a crack in my pad outside the garage. I had the pad coated using sealer, sand, and a Sherman Williams tint. My pad looks so nice. They are a hard working, professional team who pay attention to details. The end products were well done. I am very happy with their work.”
Public records and third-party ratings, each linked to the source that issued it.
Two finish systems over the same polyurea base and polyaspartic top coat: decorative flake blends and paint-matched silica. Every floor gets a slip-resistant top coat, and residential and commercial floors carry the same lifetime warranty.
Decorative vinyl flake broadcast. Durable, slip-resistant, and the most popular choice for garages, shops, and commercial spaces.
Tap any blend to see it larger.
All blends include a slip-resistant polyaspartic top coat.
Get a free quoteMost garages start and finish on the same day, with our own crew from grind to top coat. Here is how the day runs.

25-inch planetary grinders open the slab profile, and we dust-extract as we grind. Your garage stays habitable.
Routed cracks filled with polyurea. Pitted and chipped areas patched with rapid-set mortar before any coating goes down.
First pigmented polyurea coat goes down with squeegee and back-roll. Chip broadcast happens while it's still wet.
Vinyl chip broadcast to refusal. You literally cannot fit another flake.
After the base sets, loose chip is razor-scraped flat and vacuumed. The slab is now level, sharp, and primed for clear.
High-solids polyaspartic clear locks the chip. UV-stable. Chemical-resistant. Walk on it in about 8 hours, drive on it in about 72.
Crew packs up at sunset and the cure clock starts. Walk on it in about 8 hours. Set light things on it in 24. Heavy in 48. Drive on it in about 72. By the weekend you've forgotten the slab was ever bare.
A real basement from one of our jobs. Old flooring glue ground off the slab, then a full flake floor coating laid through the room and the bathroom. Drag the slider to compare.


Every floor photo is a real Rhino Coatings install. Filter by job type or open any image full size.
Services in these photos
Garage floor coatings Basement floor coatings Shop and commercial floor coatings Patio and pool deck coatings Garage cabinets
Two locations cover the map: our Coeur d'Alene headquarters serves North Idaho and the Spokane area, and our Boise location serves the Treasure Valley. Pick your area to see the towns we cover.
Straight answers about cost, timing, epoxy and the warranty. Still deciding? The polyaspartic vs. epoxy comparison covers the chemistry, and a free on-site measure gets you a fixed price.
Rhino Coatings works throughout Idaho and Eastern Washington from two Idaho locations. The Coeur d'Alene headquarters serves North Idaho (Coeur d'Alene, Post Falls, Hayden, Rathdrum and Sandpoint) and Eastern Washington, including Spokane and Spokane Valley; call 208-500-1043. The Boise location serves the Treasure Valley (Boise, Meridian, Nampa, Eagle, Caldwell, Kuna and Star); call 208-228-9779.
No. We install a polyurea base coat with a UV-stable polyaspartic top coat instead of epoxy. It is a more abrasion-resistant top coat than epoxy, you can walk on it in about 8 hours and drive on it in about 72, so most floors are done in one day, and it does not yellow in sunlight.
Most garages and other residential floors are finished in one day by our own crew: diamond grinding and crack repair, then the base coat with a flake or silica broadcast, then the top coat. You can walk on the floor in about 8 hours and park on it in about 72 hours.
It depends on the square footage, the condition of the slab and the finish you choose. We measure for free at your home and give you a fixed, written price, with no surprise charges on install day.
Every floor we coat, residential or commercial, carries a lifetime warranty against peeling, delamination and hot-tire pickup. It comes in writing, with a fixed price, before the crew arrives.
Usually, yes. We diamond-grind the slab and fill cracks, control joints, spalls and pitting before any coating goes down, and a badly worn slab gets extra grinding and repair first. We also repair concrete on its own, without a coating.
Both have some grip. Flake is the usual choice for a dry garage or basement where the look matters most. Silica grips better when wet, so we recommend it for patios, walkways, pool decks and floors that get wet often. Both go over the same polyurea base coat and polyaspartic top coat.
Rhino Coatings LLC is a registered Washington contractor (#RHINOCL741CF) for our Spokane-area work, bonded and insured, and an Idaho limited liability company registered with the Idaho Secretary of State since September 2024. We are veteran-owned and BBB Accredited with an A rating.
Tell us about your floor and we'll set up a free on-site measure. The rep checks the slab, shows you colors and gives you a fixed, written price. No high-pressure sales.
Or call 208-500-1043
The form takes about 45 seconds, and we'll text or email you within the hour. Phones answer Mon-Fri 8am-6pm, Sat 8am-4pm, Pacific time.